How Long Does It Take To Break In A Subwoofer: Tips & Guides

How much time does a subwoofer need to be broken in? Do you want to get the most out of your subwoofer? Many people don’t realize that woofers must be broken in before reaching their full potential. This can take a few hours, days, or even weeks, and it’s important to do it properly.

We have a guide on breaking in subs, so you can do it right. Check out our guide on how to break in a subwoofer and start enjoying better sound today! We’ll walk you through each step and ensure you get the most out of your investment. Plus, we have some great tips for making your music sound better.

Do You Have To Break In Subwoofers

There is a lot of discussion about whether or not you have to break in a subwoofer. Some say it’s necessary, while others maintain that it’s not. So which is it? The answer to this question is a little complicated. There are a few things to consider, such as the type of woofer you have and how you plan on using it.

Let’s take a closer look at each of these factors.

Type Of Subwoofer

Active subwoofers have a built-in amplifier, while passive subwoofers do not. If you have an active subwoofer, breaking it in is unnecessary.

On the other hand, if you have a passive sub, it’s a good idea to break it in. It is because the amplifier is not doing the work of breaking in the loudspeaker system. The subwoofer will need to be broken in by playing it at moderate volumes for a few hours.

For more information:

How You Plan On Using The Subwoofer

Another factor to consider is how you plan on using the subwoofer. If you’re going to use it for movies, music, or games, it’s not necessary to break it in. However, if you use the woofer for competitions or other high-level events, it’s a good idea to break it in. This is because the woofer will be under more stress and must perform at its best.

What May Occur If You Don’t Break In Your Subs

One or more of these problems could arise for you.

How To Break In A Subwoofer: Ultimate Guide - Subwoofer Break

  • Burned/unwound coils: A distorted signal and the development of too much heat can result in burned or unwound coils. The coil heats up inside the gap due to excessive power consumption since it cannot move far enough to enable heat to escape.

Your driver experiences less suspension movement or excursion thanks to stiff spiders. The woofers’ suspension protesting at higher pressure unit volume settings means you can bump into a damaged signal much more quickly. Additionally, this will result in rapid heating of your coil.

  • Ripped/torn suspension: Because the spiders have become too tight to move, you risk ripping them from the tri joint and basket landing and inflicting mechanical failure. As the chassis fights back, you will also notice that distortion occurs far more quickly on a new, rigid woofer than on a broken one.
  • Mechanical failure: The woofer’s structure and design are not intended to handle the extra strain of a new, stiff suspension. As a result, you could see the cone deforming, the basket warping or other pieces breaking off entirely. Any of these failures will cause your sub to stop working correctly.
  • Incorrect break-in procedure: If you don’t properly break in your subs, you could end up causing long-term damage that can’t be undone. Make sure you know how to do it correctly before attempting the process.

Breaking in your subs is essential to ensure that it lasts as long as possible and continues to perform at its best.

Do Subwoofers Get Louder As They Break In

Subwoofers are a type of loudspeaker designed to reproduce low-pitched audio frequencies. Their bass sound is often used to create a more immersive listening experience for movies and music.

Many believe woofer systems require a long break-in period before reaching their optimal performance, but some research has shown that they may reach their peak performance sooner than expected. It is generally accepted that subwoofers need around 20 hours of subwoofer break in time before they sound their best.

The Break-in Period

During the break-in period, avoiding playing your loudspeaker system at extremely high volumes is important. This can cause long-term damage to the speaker and may void your warranty. However, a study by the National Research Council of Canada found that most subs reach their full potential after only 10 hours of use.

Playing your woofer at moderate levels during the break-in process is best. After the initial break-in period, you should continue to use your subwoofer regularly to keep it sounding its best. The speaker may become less efficient if you don’t use it often. So, if you want your device to sound its best, give it plenty of use.

How Long Does It Take To Break In Subwoofers

You need to play your music at a higher volume than you usually would and let it run for hours at a time. You also need to ensure that the subwoofer is properly sealed, so the sound doesn’t escape. If you follow these steps, you should be able to break in your subs within a few days. It takes time to break into a woofer.

However, if you don’t have the patience to wait, you can always take it to a professional audio shop to break in. Breaking into a subwoofer is important because it allows the speaker to loosen up. This, in turn, will allow for better sound quality and volume. The woofer will also last longer if it’s properly broken in.

So, if you want to get the most out of your subwoofer, take the time to break it in properly. It will be worth it in the end!

How Do You Break In A Subwoofer

It is important to break in a subwoofer properly before using it for the first time. This will ensure that the subwoofer performs at its best. Depending on your preferences, there are several ways to break in a subwoofer. One popular method of breaking in a speaker system is to increase the power over time.

A Subwoofer

Start playing music at moderate volumes for the first few hours and then gradually increase volume over the next few days. Let’s listen for strange noises from the subwoofer and follow the manufacturer’s instructions.

Another popular method is to play music at high volumes from the start. Start with the volume at a moderate level and increase it gradually over time. This will help the subwoofer to reach its full potential faster. However, you need to be careful not to damage your audio equipment by playing the music too loud.

There are a few things to remember when breaking in subs. First, follow the manufacturer’s instructions closely. Second, take your time and don’t try to rush the process. Again, listen for any strange noises from the speaker and stop if you hear any.

Finally, be careful not to damage your audio equipment. With proper care and break-in, your device will provide years of enjoyment.


Are subs more violent following a break-in?

Yes! It is important to note that not all subwoofers need to be broken in. Although break-in usually sounds different from how your speakers will sound after they have broken in, if you take better care of them and pay attention during this process, you can get excellent results.

If you use a car audio subwoofer not made of paper, you can break it in by playing it at low volumes for about 20 hours. However, if you have a home theater subwoofer, you should break it in. Usually, 100 watts is enough to break in most home theater subs. Play music or movies at moderate levels for about 20 hours to break your woofer.

The goal is to get the suspension moving and to work out any manufacturing defects that may be present. After your woofer is broken in, it will perform better and sound great!

Is becoming warm for subs normal?

Warm Is Normal For Subs

Yes, becoming warm is normal for subs. However, you should expect your woofer to become warm to the touch after extended use. When you start using it may take some time to break in and become accustomed to being played at higher volumes. This process can vary depending on the subs and their use.

If your woofer ever feels hot, check it for any potential problems. It is generally recommended that you give your loudspeaker system at least 20 hours of break-in time before you start pushing it too hard. It will allow the suspension and drivers to loosen up and reach their optimum performance levels.

After your woofer is broken in, you can start cranking up the volume and enjoying its full range of sound!

How long do subwoofers last?

The answer to this question highly depends on the product’s quality and how well it is taken care of. A good quality subwoofer should last many years if properly maintained and not overworked. However, a lower-quality device may last only a few years or even less if it is not well taken care of.

Additionally, the subwoofer’s amount of use will also affect its lifespan. It is only used occasionally and may last much longer than one used daily. It is important not to overwork it and to give it proper rest periods to extend the lifespan of your subs.

Watch the video to learn more helpful information:


How much time does a subwoofer need to be broken in? It usually takes a few weeks to break. During this time, you should play your music at moderate levels so the speaker can loosen up and sound at best.

After the initial subwoofer break in period, you can crank the bass for an even more powerful sound. Have fun testing out your new loudspeaker system, and enjoy the improved audio quality!

Associated posts: